W8JKC

I have 3 Motorola radios and 1 Yaesu radio for sale.

UPDATE: These radios have all been sold and are no longer available.

Package 1: 2 Motorola SP50 UHF Portables. Asking $175 or best offer.
Package 2: 1 Motorola MT1000 UHF Portable. Asking $70  or best offer.
Package 3: 1 Yaesu FT2200 VHF Mobile/Base. Asking $130 or best offer.

I also have 4 GE Ericsson MLSL161 Low Band Mobiles 8 Channel 50 Watt (FCC ID: AXA9HHMLSL161). Asking $75 each.

Shipping: $11 per package, or $15 with 2 or more packages combined. TO U.S. addresses only. Local Delivery/Pickup Available within 20 miles of 44707 zip code. (Wooster, Alliance, Canton, Akron, Massilon)

Payment: Paypal or U.S.P.S. Money Order Only.

Package Details:

1. 2x SP50 UHF 10 channels 4 watts, 2 radios, both programmed to same freqs and tones on all channels. Will talk to each other. Comes with 2 speaker mics and 2 chargers.

2. 1x MT1000 UHF 16 channels 2 watts, 1 radio, MUST be REPROGRAMMED after delivery. Comes with 1 speaker mic, and 1 charger.

3. 1x FT2200 VHF 50 channels 50 watts, 1 radio, Comes with DTMF Microphone, mounting bracket, and factory power cable.

Radio Specific Information:

1. SP50 – FCC ID: ABZ99FT4052
Model #: P94YQT20G2AA
S/N #: 777YCW62**

2. SP50 – FCC ID: ABZ99FT4052
Model #: P94YQT20G2AA
S/N #: 777YCW64**

3. MT1000 – FCC ID: AZ489FT4717
Model #: H34CUZ**GN
S/N #: 749AS***5

4. FT2200 – FCC ID: AKHFT2200
Model #: FT2200
S/N #: 5C2500**

You can view pics of these radios at this address: http://www.w8jkc.com/images/radios.php

These are great deals. Do not pass them up.

Please contact me by email or phone (330) 806-6700 to purchase or make an offer.

BUYER IS RESPONSIBLE FOR FCC LICENSING AND PROGRAMMING UPON DELIVERY.

Posts | No Comments »

This past thanksgiving weekend I upgraded my primary server.

I backed up about 19 GB of data, including websites, configurations, and other important data. That took about 7 hours. After that was complete I DBAN\’ed the hardrives and proceeded to boot from a CentOS 5 netinstall disk. This took about 1 hour to download and install all the packages and format the harddrives.

Here are the details of this server:

RAM: 380 MB, soon to be upgrade to about 1GB.
CPU: Intel Pentium 3 (667Mhz)
Graphics Card: ATI Rage 3 128 RF/SG AGP

Main HD: 10GB Fujitsu MPF3102AT
Second HD: 80GB Western Digital WD800BB-55JKC0
Network Card: 10/100 MBPS Intel Corporation 82557/8/9/0/1 Ethernet Pro 100

Mount Points:
/boot EXT3 /dev/hda1 122 MB
/        EXT3 /dev/hda2 6.2GB
/tmp  EXT3 /dev/hda5 1GB
/var    EXT3 /dev/hdb1 72GB

Note: You can view this systems details at any time by visiting http://wcatserver2.wcatnews.com

I attempted to install an Hosting Control Panel package, but it didn\’t work. Maybe later I can install a package such as ISPConfig (http://www.ispconfig.org)

This server is better with page load times, and speed than the old one. On average it took 30 secs or more to load this blog from the local network. Now it loads in under 10 seconds. Ideally after the RAM is upgraded it should load in under 5 seconds.

If you want more information on this box , please leave a comment or email me.

I am setting up a Mail, Mailing List, and Web Server on this machine, along with the Stark Scanner feed for http://scanamerica.us
You will notice on the right menu bar below the iTunes Video of the Week, a new Web Player of this feed.
For now I set that to plat Chicago FD, due to the fact that the software to broadcast the audio is not setup yet.
Server1 (http://wcatserver1.wcatnews.com) will host backup Web, IRC, and other software.

Both servers support SSL, PHP, and MySQL.

Posts | No Comments »